DN19X30mm Manual Swing Fire Hose Reel

The manual rocker arm design enables immediate extension of the hose upon manual pulling in case of emergency. With just a human pull, high-pressure water flows out instantly, providing a crucial 60 seconds for firefighting.

The core components are made of high-quality brass, which is resistant to corrosion and high pressure, eliminating any leakage or dripping. This ensures that the equipment will not fail at critical moments.

We are well aware that your needs are diverse. We offer deep customization for hose length, nozzle style/material, and valve style/sizes, ensuring perfect fit for any fire-fighting scenario and installation requirements.

 

	Diameter: 19mm / Length: 30 m	Perfect balance between water output and maneuverability. With a 30-meter range, it is sufficient to cover most indoor spaces, allowing for smooth movement.
	12 Bar	Exceeds regular requirements, ensuring strong and powerful water flow, effectively impacting the root of the fire source.
	34 L/min	Scientific water flow rate design, capable of effectively extinguishing fires without causing secondary damage to the site due to excessive water pressure.
	3/4'' Brass Ball Valve	Brass material ensures the valve is durable and long-lasting. The ball valve structure opens and closes quickly with excellent sealing performance, ensuring no water leakage.
		The copper nozzle is more professional and durable, while the plastic nozzle is economical and lightweight, meeting different budgets and requirements.
		Your needs are our standard! Whether for special sites or specific regulations, we can meet your requirements.

 

 

In-depth Analysis

 

With a full-diameter design, it offers low water flow resistance and low pressure loss. The finely polished valve core ensures that it remains as sealed as new after tens of thousands of openings and closings.

High-strength alloy reel: Lightweight yet structurally robust, with smooth rotation and effortless reeling. The surface is coated with multiple layers of epoxy resin paint, which is corrosion-resistant and maintains its luster over time.

19mm fire-fighting special hose: Inner lining is made of wear-resistant rubber, and the outer layer is woven with high-strength fibers. It has good flexibility, is resistant to pressure, folding and aging, and has a long service life.

This roll-up cover is an ideal choice for the standard fire protection equipment in various places:

 

• corridors and public areas of office buildings, shopping centers, and hotels.

 

• The first response fire-fighting points for workshops, warehouses and parking lots.

 

• schools, hospitals, subway stations, libraries, museums.

 

• Standardly equipped in the fire hydrant boxes of high-rise buildings.

One-stop customization: We are not merely a product seller, but a provider of your fire protection solutions. For any non-standard requirements, we can tailor them to your specific needs.

From the warehousing of raw materials to the production of finished products, a rigorous quality inspection process is followed to ensure that every product leaving the factory meets or even exceeds national standards.

Direct supply from the factory, eliminating the middle links, providing you with truly cost-effective products, maximizing the value of your procurement budget.

 

 

Safety cannot be compromised; choice determines success or failure. This is not just a fire hose; it is a solemn commitment to life and property.

 

to offer the most competitive prices, the most flexible delivery options, the most reliable product quality, and the most considerate customization services.

Click to inquire for a personalized quote and samples.
Tell us your specific requirements (such as hose length, nozzle material, valve size, etc.), and our professional team will provide you with an accurate solution and quote.

Q1: Is the 30-meter length of this hose sufficient? Under what circumstances would a longer hose need to be customized?

A: 30 meters is a scientifically calculated standard length that is sufficient to cover most indoor scenarios. For instance, in a standard office building or hotel corridor, starting from the fire hydrant location, a 30-meter range can easily cover 2-3 rooms or the corner areas of one floor.

When considering customizing longer hoses (such as 40 meters, 50 meters), you need to take into account the following:

• Large open spaces, such as warehouses, aircraft hangars, and large workshops.
• Special architectural structures, such as extremely long corridors, buildings with L-shaped or U-shaped layouts.
• A scenario where a larger protection area needs to be covered from a fixed point, in order to reduce the number of fire hydrants.

Q2: What are the significant differences between copper nozzles and plastic nozzles in practical usage? How should I make a choice?

A: This mainly depends on your budget, usage frequency and the requirements of the scenario.

• Extremely durable, resistant to dropping and corrosion. It doesn't age easily over time and appears more professional and upscale. It is particularly suitable for industrial plants, high-frequency drills or places with extremely high requirements for equipment lifespan.
• The top choice for aiming for a one-time solution and achieving the lowest long-term cost.

• Lightweight, low cost, and highly economical. For places such as hotels and office buildings that have extremely low usage frequency and are mainly used as compliance configurations, it is a completely sufficient and highly cost-effective choice.
• Projects with budget constraints, large-scale procurement, and weight requirements.

You can definitely mix and match. For example, uniformly configure copper nozzles for industrial customers and plastic nozzles for residential projects. We support flexible combinations.

Q3: The product is labeled with a working pressure of 12 bar. So, what is the minimum pressure that our water supply network needs to have in order to ensure its effective operation?

A: 12 bar represents the maximum safe pressure that the drum can withstand, rather than the starting pressure.

• Generally speaking, to ensure that this reel can spray out an effective water flow that meets the fire-fighting requirements, the pressure at the inlet needs to be at least 0.4 to 0.6 MPa (approximately 4-6 bar). This pressure value can be easily achieved in most municipal water supply and building fire protection networks.
• If the pressure in your pipeline system consistently exceeds 12 bar, please inform us when placing your order. We can provide you with a pressure reducer to protect the reels and hoses, ensuring the safety of the system.

Q4: Is this roll pan easy to install? What are the requirements for the pre-embedded boxes or supports?

A: The installation is very simple. The product design has fully taken into account standardization and compatibility.

Standard 3/4" external thread interface, which can be directly connected to the pre-installed fire protection pipeline (also 3/4" internal thread) embedded in the wall or the corresponding flexible hose connector.

1. Use the matching L-shaped bracket and fix it to the solid wall.
2. Wall-mounted installation: It can be fully embedded in standard fire hydrant boxes, presenting a neat and attractive appearance.
3. For areas without walls, custom column supports can be provided.

Q5: We are a large property management company with a huge procurement volume but varying project standards. How far can your customized services go?

A: Customization to a deep level is our core strength. Besides the hose length, nozzle and valve, we also offer:

• The logo of your company can be printed or engraved on the reel cover plate, nozzle, etc., to unify the brand image.
• The roll-coated paint color can be adjusted according to the main color tone or safety color standard requirements of your project (such as international red, yellow, etc.).
• It can be upgraded to a butterfly valve, gate valve, or equipped with a pressure gauge interface as needed.
• In addition to standard pipes, we can also provide pipes made of different materials such as polyurethane.

State your requirements → We provide technical solutions and quotations → Confirm and then start production → Ship after strict quality inspection. We regard each major customer as a strategic partner and are committed to providing exclusive supply chain solutions.

Investing for safety is the wisest decision. Choosing us means choosing peace of mind.